From parading around in Mum’s high heels to playing in a princess gown, what child doesn’t adore dressing up?
Gather your supplies
76 x 102cm artist’s stretched canvas
300 x 42 x 19mm pre-cut DAR pine battens (2)
Dulux Wash & Wear Advanced Low Sheen acrylic paint in Lickedy Lick and Hydrangea Pink
Jo Sonja’s Artists’ Colour in Metallic Rich Gold
- Step 1: Base-coat canvas with 2 coats of Hydrangea Pink paint and leave to dry. Mask off a 15cm-wide section down left-hand side of canvas with tape. Paint rest of canvas, pine battens and all MDF letters with 2 coats of Lickedy Lick paint. Let paint dry.
- Step 2: Hot glue painted letters down one side of screen to spell ‘MAGIC’.
- Step 3: Paint all stars (including the wand star) with 2 coats of gold paint. When dry, apply a coat of Mod Podge on front of each star, then sprinkle with glitter. Let dry.
- Step 4: Glue end of ribbon to bottom of wand handle. Start from bottom and work your way upwards, winding ribbon in a spiral around wand handle (as pictured). Glue ribbon ends to secure at top, and finish with a bow.
- Step 5: Hot glue sequinned braid over colour join on canvas. Glue stars and wand onto screen.
- Step 6: To make feet, drill 2 holes through bottom of screen, 150mm in from each end. Drill a hole through middle of each pine batten.
- Step 7: Insert bolt in 1 pine batten, align with hole in screen, insert bolt and secure with a wing nut. Repeat with remaining batten. Stand screen upright.
You’ll also need
You'll also need: MDF capital letters in M, A, G, I, C; 3 large and 6 small MDF stars; wooden star wand; 6mm-wide craft ribbon; Mod Podge; glitter; gold sequinned braid; 2 x 100mm hex head bolts and 2 wing nuts to match; paintbrushes or rollers; paint tray; masking tape; hot glue gun; drill; countersunk drill bit to suit bolt size